Best chainsaws are one of the worst tools ever made for tree cut. A chainsaws is a machine of excellent performance and of wide utility. It replaces a great number of tools like the ax and the cutter and distinguishes by its greater comfort and capacity. However, using a chainsaw requires taking precautions because it can cause numerous accidents.
Several adjudicate tried to the invention of the chainsaw in the 1920s; nevertheless, earlier, at the beginning of the century, a chain saw with a water-cooled boat engine had already been presented. It was then, they were much heavier and difficult to use. In fact, it was necessary that at least two people manipulate it. After World War II, began to develop saws and chains that made possible the creation of single-person saws. In 1959, the company Husqvarna created the chainsaw model as it is known today. Over time, they evolved to become lighter and less noisy. Today, there is a great variety for the different uses that are given to it.
The best chainsaw is considered an agricultural and forestry tool. Their uses can be very varied, such as the cutting of trees, the cutting of logs, and also the pruning of shrubs or hedges. For its comfort and performance, it is one of the tools most used in agricultural work and mainly in forestry. It is also widely used in gardening.
As arborist chainsaw review, it can be electric or gasoline engine. The electric ones are excellent for the smaller works like the pruning or other works of gardening. They are lighter and less noisy machines. They are easy to use and do not require much maintenance. However, they are not as powerful and require to be used near a power outlet. The gasoline engine chainsaws are more powerful and have very good mobility. They are used in heavier jobs and require maintenance. They use a mixture of oil and gasoline, so they smell. The starting system is with rope.
The best chainsaw is a great tool, but it is the one that produces the most accidents. Therefore, it is important to wear protective equipment and be informed enough to know how to use it safely. The first thing is to read the manual of the chainsaw. If it will be used to remove fallen trees and debris, wear entire head protection, thick gloves, special leg guards, and safety boots with steel tips.
Also, do not cut with the tip of the Guide bar; Hold the machine firmly; Not cut at a height above the shoulders do not extend the arms much; Chain, brake, lock, etc. Check that the carburetor is tight and if it is a gasoline chain saw, it must be recharged when the engine is cold. In addition, having sharp chain spare parts is very important. An uneven chain, makes the job more difficult and increases the chance of an accident.
If all of these precautions are followed, more often than not, using a chainsaw is one of the best options to do a job with less effort and a good time saving.
Chainsaw Buying Guide, Comparison and Reviews
Top Rated Chainsaws For Your Invest
Time To Choose…
you need a best chainsaws? Here you will find a special selection of chainsaws: simple or with more features, economical or slightly more expensive, so you can choose the one that you prefer and best suits your budget.
Practical chainsaw with chain saw AKE 35-19. Very fast tool with a very powerful engine of 1900 whose chain has a speed of 12 m / s, which allows it to have a magnificent performance when cutting. It is a very handy saw that has a special system that allows the chain to be changed without needing any tools.
It is a robust saw of high quality and with a guaranteed durability, since it is designed to be used frequently. You can work with it in any position because thanks to its good performance will remain balanced. It also has a quick stop brake, fast and very efficient. It has an ergonomic handle designed to cut in different directions and with steel claws with which it will be easy to guarantee the attachment of the tool. The chain links are crafted and a sturdy steel.
No products found.
High quality Black & Decker chainsaw. With a high cutting capacity, it is an electric saw that will work quickly. Also a very safe tool, because you can control the chain, block it and has a very powerful brake. It is also a tool that weighs very little and has a very good balance, so it can be used to cut in all directions.
A very powerful tool and is especially recommended for use in private gardens. The chain is automatically lubricated, and it is easy to fill and recharge the chainsaw, its operation is simple and it is a very practical tool. As a negative note, it should be noted that the cable is very short and it will be necessary to use extension cords.
- Powerful 15 Amp motor
- 18" Oregon low-kickback bar and chain
- Tool-free chain tensioning
- Automatic oiling system
- Chain break feature for safety during use
Special chainsaw that runs on gasoline brand Makita. It is a basic chainsaws, but at the same time very good and is very well valued by users. The length of the chain is 40 centimeters and the weight of the tool is 4.1 kilograms. It is a chainsaw whose engine has a power of 1.35 kW and is really good.
Both the quality of the materials with which this chainsaw is made and the power of the cut obtained with it are of quality. It is a motorcycle more than recommended at a very good price and with a chain with a great quality. It is easy to mount and handle and has the perfect weight to work with and handle. A great choice for both domestic uses in home gardens and to use as a working tool.
- Easy-starting automatic half throttle lock
- Chain compartment is easy to clean and clears chips away efficiently
- Slide out baffle can be configured for efficient cold weather operation
- Large metal spike bar for increased productivity
- Two point durable inertia/mechanical chain brake
- Decompression valve reduces force required for starting
Practical and useful battery operated best chainsaws for firewood, Greenworks brand. It is a product that weighs 4 kilos with a battery-style power supply. This chainsaw has a large cutting capacity and is available in green and black. It is an interesting option to use as a basic domestic chainsaw.
In addition, it is a “green” chainsaw, specially designed to consume less, so it is much more ecological and is available in nice green and black colors. It is a machine that does not need and does not include batteries, also interesting to use as an option for different garden tasks (for small gardening, simple hedge cutting etc.).
- Up to 150 cuts with fully charged 2Ah Battery, Battery included
- DigiPro Brushless motors are more reliable and delivers gas Equivalent performance to a 45cc gas engine
- Steel bucking Spikes, durable metal wrap around handle and electronic chain brake for safe operation
- Rapid 30 minute charge for standard 80V 2Ah Battery, multiple Battery capacity available.The GCS80420 is a well-designed machine made from hard plastic and metal
- 80V 2Ah Li-Ion Battery and charger included, compatible Battery and charger models GBA80200, GBA80400 and GCH8040
Which best chainsaws should to buy?
First of all the choice to buy a top rated chainsaws comes from you are going to use, both in intensity and frequency. These can be very varied: professional use, use for garden or domestic farm, pruning trees, cutting logs, pruning height, etc. All these uses will determine the professional chainsaws that you should buy. Therefore it i also need to know who makes the best chainsaw in the world, which brands is perfect for for cutting trees.
There are many models of best chainsaw for big logs both electric and gasoline. The former are suitable for small domestic tasks, not professional. These electric models are not totally autonomous since they depend on a connection to the electric network. However they have low noise levels, they are light and very easy to use.
The models with gasoline engine are chainsaws where they vary their displacement, power, cut length. The models with small motors, of two times, are ideal for the maintenance of gardens or more extensive farms, cut logs, felling small trunks and until average. Models of chainsaws with larger motors are already indicated for professional uses.
In this way we will always have a chainsaw that meets our expectations and serves perfectly now and in future for the use we are going to give. Always try to choose according to its lightness, with little vibration (the generated vibrations can make the user fatigue more quickly), and that the engine is updated to the current regulation. In general, chainsaws with two-stroke engines reduce emissions and have lower consumption. Safety features (back guard, chain brake, right guard and chain catch bolt) that are easy to maintain (side chain tensioner, which lubricate and sharpen it, frequent tasks, can be carried out easily and without risks) must be other characteristics that lead us to choose one or another chainsaw.
This chainsaws are very precise instruments that are used in gardening, to cut wood and to make some reforms. Get out of your head the horrible and scary scenes from films like SAW or The Texas Chainsaw Massacre in which this device is the character of the scene.
In general, a good chainsaws can be classified into 4 categories:
They provide maximum performance and optimum ergonomics. They are designed for professional use whether intensive or occasional.
Chainsaw for General Use
They are robust chainsaws and manufactured in a similar way to the professional chainsaws, only with a slightly lower performance. They are designed for occasional use.
Small, easy-to-use chainsaws designed for home use by “amateur users” who do not use their chainsaw too often. These chainsaws have been developed for use by professional arborists.
Size of the chainsaw
The size of the best chainsaws is determined by the displacement (cm³) and power of the motor (expressed in horses and kilowatts). The size you will have to choose will depend on the following two factors:
Level of skill and experience: The less experience you have, the lower your chainsaw engine should be. A small chainsaw will be easier to handle than a large one. If the chainsaw is too heavy, your arms and hands will feel bitter, which may in the long run pose a risk to your safety.
Types of wood and size of trees: The chainsaw has to go in accordance with the size of the tree to be cut. One of larger size and power if you want to cut larger trees; especially those of hardwood. If the selected model is too small, the chainsaw will be subjected to great stress and unnecessary wear.
What features should you be looking for?
If you are thinking about acquiring a chainsaw you should keep in mind some points by arborist chainsaw reviews. First of all you should value what you want it for, what you are going to use it for. A chainsaw is not the same for domestic use as a chainsaw for work. It is not the same a chainsaw that will be used for several hours each day that one that will be used several times a year.
It will not be the same to use the chainsaw for simple garden tasks or to cut wood. Once this is done, you should start to consider other important points.
The safety of the tool that we are going to choose. Our chainsaw review have some elements and characteristics that guarantee the safety of the people that will operate with it, among these measures include chain brake, recoil and chain protection. They should also carry comfortable handles, which protect against the vibrations that occur.
The power of the chainsaw is another point to consider. You should choose one that has adequate power to perform the tasks that we want to perform.
The cleaning system or filter. Another interesting point would be that the chainsaw you choose has some system of cleaning the accumulation of dust or sawdust, so that it is not stored continuously.
Maintenance and use. A chain saw should be selected, the use and maintenance of which is simple, practical and efficient, to save time and operate correctly and effectively.
The accessories. In order to say it between a chainsaw or another, you can also check the accessories present in each one of them, in order to choose the one that suits us best or suits the use we are going to give it.
Thus, it is also acquire knowledge in differentiate of between chainsaws of gasoline, chainsaws of battery or electric chainsaws (or electric saws). In order to choose one or the other, we must also take into account the use that we are going to give. The electric ones are mainly recommended for the users who are going to give it a domestic use. The higher-powered gasoline engines are usually used for working and battery-operated ones, such as electric ones but with greater autonomy, are used for various types of uses (both domestic, for example garden and labor).
What Are the Benefits of Chainsaw?
Like other tools, the best chainsaws should be used with great care, as improper handling can lead to a serious accident and even death. According to estimates by the US Centers for Disease Control and Prevention, hospital emergency departments receive an estimated 36,000 injured each year from the misuse of chainsaws, a figure that increases even more, following natural disasters such as heavy rains Or hurricanes, when using this tool to remove fallen trees or branches.
The characteristic angles of the cutting links are of particular importance. On a U-shaped recess. A protrusion at the front limits the penetration of the chainsaw chain, and, behind it, a blade, bent 90 ° with respect to the plane of the bar, draws wood chips as a result of its cutting edge.
It is defined as the frontal attack angle of the cutting element which forms the upper edge of the same with a line perpendicular to the Guide bar; should be maintained with values between 30 and 35º. As this angle becomes smaller, the cutting speed is reduced, which may be appropriate for cutting very hard wood; However, as this angle increases the cut tends to deviate from the intended line, while increasing chain wear.
The ideal angle of cut, is that which forms the leading edge of the cutting edge with the vertical. It should be maintained between 85 and 90º, because if it becomes bigger the tooth penetrates badly in the wood and tends to provoke the kickback, offering a greater tendency to break and to lose the edge. If the angle is lower than these values, it tends to cut off end, which leads to an irregular cut and the lock of the chain by retention of the chip.
The angle of the edge is that which forms the upper edge with a plane that rests on it; this angle should be 60 °. In case it is bigger, it is necessary to make more force on the chain to deepen, with less performance. By reducing the cutting angle, the chain wears off quickly.
Chainsaw. Machine equipped with a motor, used to cut trees or branches. Its small size makes it possible for a worker to move and to work with his hands in the forest or in any open space. Fixed machines and hand implements for sawing (sawing) wood are simply referred to as sawing.
Best Chainsaw, why not make you Best
The chainsaw is a highly effective and efficient tree cutting power tool. Purchasing a best chainsaw may seem like a daunting task at first. There are many choices and options to choose from, while that is good, it can also get a little confusing. Deciding on the right chain saw broadly speaking relies upon on the form of work you want to perform and your level of experience. While you are seeking out a brand new chainsaw, there is a pair of factors worth considering so one can make your work easier; the size and type of wood you will be cutting, the strength and experience of the user, and your budget.
Primarily using of best chainsaw
Ease of use is the most deciding factor; controls should be accessible and simple to operate. A chain saw ought to fit your needs. It should be comfy to hold and work with. There are many different saws so that you can tell the difference between a good and bad fit. A saw that is comfortable to use is safer to use. When working during winter, it is essential to consider a chainsaw with a heated handle and a heated carburetor.
If you are a regular house owner with an occasional want for a best chainsaw, most effective for doing a few cutting a few times a year, then an electric powered chainsaw should fit you just right. Then again, if you are felling medium sized
timber or operating in the woods then you will absolutely want a gas chainsaw. If you are cutting hard woods, you will need a powerful gas chainsaw. It is more than just the bar length that determines the size of wood you can cut. Size also does matter when it comes to chainsaws. The bar length should be twice longer than the wood you want to cut. With ease you can change, the length of the bar and chain, but you cannot easily change the size and power of the engine.
You need power when you using a chainsaw and you need to consider the task first. The size and location of what you need to cut will help determine whether you need a gas or electric chainsaw. Electric chain saws are the only types that can be used safely indoors on the other hand Gas chain saws cut faster in general and can be used anywhere outside. The latter are noisier than electric models. Electric saws vibrate less and are quieter, lighter, cleaner and easier to use and maintain than gas models. Electric chainsaws are good for small jobs since they require less power.
If you are not experienced with using a chainsaw, it is better to pick a lighter version, since they are easier to handle. For comparison purposes, the weight of a chain saw is nearly always specified for the power head only, because the guide bar and chain are offered in various sizes that are often changeable for a given power, gas chain saws are heavier than electric chain saw.
Electric chainsaw can be corded or cordless A cordless saw are portable, but the battery limits operating time. You may be required to recharge often, depending on the amount of work you are doing. Moreover, gas power saw are easily portable compared to both the corded and cordless electric chainsaw.
Chain designs improve the performance of your noticed and may reduce the probabilities of kickback. Kickback happens while the upper tip of the manual bar touches an item or when the wooden closes in and pinches the noticed chain within. This will be dangerous and might even lead to demise. Some chain saws may additionally have a low kickback at the same time as a few might also have a high kickback. Low-kickback chains limit the hazard of kickback; however, they do no longer remove the threat.
Chainsaw Bar length represents the active cutting area and represents the largest size length of wood the chainsaw can cut in a single pass. The larger the bar length, the greater it is to handle the chainsaw and the more the danger of injury due to the fact that the chainsaw becomes unbalanced and fatigue turns into a component as the chainsaw feels heavy over lengthy duration of utilization. In addition, a not unusual chance of chainsaws is the prevalence of kickback, that is more likely to arise with a longer bar length.
A petroleum or gasoline chainsaw is the satisfactory desire if you are running long hours out in the woods since you do not ought to bring greater batteries around. However, in case you are doing garden work at home an electrical chainsaw is an amazing opportunity if you get batteries, you can charge one at the same time as you are using the alternative. Using an electric powered saw is also practical and cozy, for the reason that vibrations are smaller and its miles less noisy and you do not have to worry about fumes and emissions.
In every best chainsaw, there is an oiling device, which prevents friction among the guide bar and the chain. Chainsaws want lubricating oil to ensure the chain runs easily and does now not snag. Search for a saw that allows elimination and changing of the fuel filter from the outside thru the gasoline cap and oil cap openings. Keep the chain clean. As you operate the chainsaw, ensure sawdust and timber chips are not building up within the chain. Clean the air clear filter often and replace it any time the chain saw seems to be losing power.
The most useful safety resource is to just read the manual to understand all the controls and safety features. Paying attention to maintenance can extend the life of the machine. Sharpening the blades is the most important part of chainsaw maintenance. Check your saw and chain documentation before sharpening chain.
It is important to consider the length of warranty; the typical warranty period for a chainsaw is 2 to 5 years, though some cheaper models warranties range from 90 days to one year. If you are choosing between two similar saws from different brands, opt for the one that has an extended period of warranty.
Personal protection gear is vital for the usage of any power equipment. Shopping for a best chainsaw is not like shopping for most consumer products. The difference with chainsaws is how dangerous they can be if not used well. The threat of damage is a consistent threat but also avoidable if you observe a few basic rules and wear the proper protective equipment. Not only is it is it crucial to buy the proper chainsaw for your needs, but equally important is ensuring the high quality and safety capabilities of the specific model you are thinking buy.
Do not base your decision solely on price; your health and safety are priceless. So get educated and make an informed decision. Protective gear is not optional when using your best chainsaw so be prepared to buy the gear you need to keep yourself safe from the moment you turn on your chainsaw. Shopping for protective gear can cost more than a chainsaw; however shopping for the proper sort of protective gear can prevent a visit to an emergency room. Ultimately, which chain saw you pick will rely in large part upon what you need to do with it. Being informed of available protection measures, the right chain saw will make any cutting task easy to deal with.
Components of chainsaws
Motor. It is the energy medium that moves the chain saw. The operator has easy access to all control mechanisms: start, accelerator, clutch, etc. It has a silencer to reduce the noise of the exhaust gases.
Chainsaw Guide bar, Guide bar or Guide bar. It is the elongated and flat piece that on its periphery supports the chain. The length of the appropriate Guide bar will be determined by the size of the tree and the degree of user experience. If you are used to the use of chainsaws, you must always have at least two different sizes of Guide bar.
A shorter Guide bar will weigh less and will be easier to manipulate when carrying out de-icing tasks. Also, a long Guide bar will be useful for cutting larger trees.
Chain saw. It is a chain of links (similar to those of bicycles) that travels along the periphery of the saber blade. Each link is provided with a cutting tooth, replaceable when worn. The chain has a mechanism to maintain its tension and a “chain catcher”, which picks up the chain inside the casing in case of sudden rupture of it. It also contains the “quick stop” chain brake, which in case of rebound stops automatically, the anti-vibration system and the chain seal, which blocks it if it slows down.
Handles. There is a hilt-shaped piece at the rear end of the best chainsaws that the operator grabs with his right hand, and another at the upper front that serves to control the direction of the cut, hold the machine and maintain its stability. Both handles have parts for hand protection.
Already know that, good chainsaw are made up of a saw guide bar, which is the support where the chain turns. Also it has;
- A lubrication system, to avoid overheating;
- The handle, to hold the machine and protect the right hand;
- The chain tensioner; the left hand control to control the operation;
- The accelerator lock, to lock the throttle;
- The idle stopper, to brake the chain when decelerating;
- The security chain;
- The chain catcher, which picks up the chain inside the casing in the event of a sudden cut;
- The protective plate, which protects the handle of the left hand;
- The “quick stop” chain brake, which in case of rebound stops it automatically;
- The anti-vibration system and the chain seal, which blocks it if it breaks.
- Clean the chain after each use.
- Sharpen the chain periodically.
- Each chain saw has a length of guide bar and chain suitable to its power. Varying the length of the Guide bar would detract from the performance of the tool. For example, if you increase the length of the Guide bar it would cause the machine to lose speed and with it cutting force. On the other hand, if you decrease it would cause the machine to revolutionize a lot and lose cutting power.
Nine Operation for Using Your Chainsaw
- Always use safety features such as gloves and goggles.
- Never move the chainsaw on
- Make sure that in the trunks or branches you are cutting there are no metallic elements such as nails or screws
- When working with a best chainsaws, grasp it firmly with both hands and keep the body in a position. That allows a good balance.
- Never start cutting wood with the front of the blade, as it can cause the arm to vibrate and the saw to rebound.
- Other elements that should be taken into account and that facilitate the use of the tool are:
- Easy start: This system allows a start-up by avoiding strong pulling of the rope.
- Chain tensioner: With this element you will not need tools or disassemble the chain for tensioning, making this maintenance task simple and comfortable.
- Ergonomics: A handle with greater grip makes it easier to use. Preventing it from slipping from your hands and facilitating the work you do.
How to choose right chainsaws For You?
A good chainsaws is a tool used for pruning, cutting or cutting wood or cutting trees. It consist of a motor that moves a toothed chain placed on a bar, known like Guide bar. There are several types depending on the engine they have and choose one type or another depends on the characteristics of the wood you are cutting, the frequency of use and the weight. A weight difference of between 100 and 200 gr can make the job more comfortable.
When choosing a top rated chainsaws, first, you must take care of the characteristics of the woods you are going to cut, and then choose, depending on the type of motor, which best suits your cut to the wood and the frequency of use.
Take into account the weight and length of the Guide bar before acquiring a chainsaw.
Do not forget to clean the chain after each use and to use protective elements, like glasses and gloves, when cuts with the chainsaw. Also, you must sharpen the chainsaw with periodicity.